Plastic Spray Anthracite Grey - 400 ml

Synthetic adhesion promoter for conventional exterior plastic vehicle parts such as PP, EPDM, ABS, PC, PPO, PA, PVC, PUR, PBT (B) and UP-GF, providing excellent adhesion for subsequent coatings. Thoroughly clean the surface with detergent and water. The surface must be completely dry and free of dust and grease. Shake the spray thoroughly. Check the spray colour shade and compatibility. Apply a thin coat from approximately 250 mm. The coating is ready after 15 minutes. After use, turn the can upside down and press the valve until it is empty.